Zhy2LG180-H10 Copper Rod Continuous Rolling Mill

• After-sales Service: Afersale Serive
• Warranty: One Year
• Take-up Machine: 6.0-8.0mm
• Main Engine Power Frame: 4200*390*820 mm
• Track Winding Reel: 800-1600mm
• Control Console: 10-Inch Touch Screen
• Model NO.: ZHY2LG180-H10
• Transport Package: Container
• Specification: Customization
• Trademark: zhenhuan
• Origin: Cn

Product Description

I Introduction
*Main Features
This equipment is used for cold-rolling oxygen-free copper rods, and continuously rolling ø17mm copper rods into ø8mm copper rods in batches. The annual production capacity is: more than 10,000 tons/year (12-hour work system).
 * Main composition

No	Composition	Information
1	Mainframe	ZHY2LG180-H10 mainframe size (4250*1200*1500mm) 1 set
2	Main engine power	Reducer motor MJ89-11KW-4P (12000N.mm) 10 sets
3	Incoming line straightener	ø17-ø10mm 1 unit (combined with the host)
4	Take-up machine	ø8.0-ø6.0mm 1set
5	Main engine power frame	4200*390*820 (mm) 1set
6	The front door cover of the main machine,	Double-open air cap door 2 sets
7	Track winding reel	ø1600mm-ø800mm 1set
8	Control console	10-inch touch screen
9	Electrical control cabinet	1 set
10	Pay-off stand	10 Combined power inverter and electric control system installation cabinet
11	Liquid oil pumping station	ø1800mm (2.5-3.0T) 1set
12	Lotion station	1.1KW gear pump (box specification 600*500mm) The body is equipped with a 1-inch water inlet port valve switch, and a 2.5-inch water outlet port 1 set
Cooling water station (self-built by the buyer)

II. Main technical data
*process parameters 

No.	Item	Data
1.	Rolling specification	Ø17mm
2.	Rod specification	Ø8.0mm (±0.10)
3.	Number of rolling passes	10
4.	Hole type system	ellipse-round
5.	Final rolling speed	100m/min (capacity 2.5-3T/hour) (The average energy consumption is less than 60kw/h)
6.	The height of the rolling center	1046 (mm) from the ground plane

* Equipment parameters(Host):

No	Item	Data
1.	Main machine form	Two rolls are horizontally and alternately rolled from left to right
2.	Roll specifications	ø180mmx50mm (Gr12MoV single hole type)
3.	Rack channels	10 channels (5 groups of flat racks-5 groups of vertical racks)
4.	Main engine power	.10 units independently equipped with reducer motor 11KW
5.	Host inverter	Standard configuration of each group of power motors (VF-11kw*10 units)
6.	Electric control system	PLC control the power system of the whole machine, real-time control on-line rolling and take-up line synchronization
7.	Lubrication system	Equipment installation and use site The thin oil station is controlled by the system for real-time and interval cyclic spray lubrication
8.	cooling system	The emulsion station is controlled by the main control system and the on-line circulating spray cooling is controlled
9.	Drawings (base drawing and front view)