I Characteristics:
The automatic wire fence welding machine adopts power electronic synchronous control technology, and the control system adopts PLC+touch screen control system, which is convenient and operate easily. The line wire is fed by coiled wire, and the cross wire is fed by cut wire. Welded wire fence can be widely used in the welding of steel mesh for bridges, coal mine support nets, highway steel meshes, bridges, pavements, floor pouring roofs, construction sites, etc.
II Main Feature:
1. The integrated variable frequency motor and helical gear reducer are directly connected to the main shaft, with low noise and high efficiency.
2. Line wire is equipped by wire straightening wheel feeding and cross wires are stocked in hopper for feeding.
3. The cross wire is equipped with a stepping motor to drive the disc hopper for blanking. If there is no wire in the hopper or the wire falling is abnormal, the equipment will be suspended until the hopper is normal.
4. The pulling net device is equipped with Panasonic servo motor + planetary reducer to ensure the stability of the system and the standardization of product size. The screen size can be input on the touch screen, and multiple cross pitches can be set on the same mesh, which is convenient and flexible.
5. The method of cutting the net, adopts the high-speed automatic cutting machine to automatically cut the net.
6. The welding transformer adopts a new type of high-efficiency epoxy resin pouring type special transformer for welding mesh. Compared with the traditional transformer, the volume is smaller, and the continuous working life is longer.
I Characteristics of mesh welding machine:
1.1 This welding machine with frame structure is used PLC control, and the operator interface is used touch screen and button control.
1.2 This machine is used of water-cooling welding transformer, and enlarged the range of wire diameters.
1.3 When welding a row of woof bar, the welding transformer will be worked separately, in order to reduce capacity requirements of power transformer and current shock.
1.4 Woof bar feeding device with stepper motor drive can be dropping rebars automatically, and the woof bar can be placed accurately.
II Main technical data of mesh welding machine
| Rated voltage |
380V, 3phase, 50Hz |
| Max. width of finished mesh: |
1500mm |
| Max. length of finished mesh |
10000mm |
| Mesh size 1 |
50-300mm(wire diameter 3-5mm) |
| Mesh size 2 |
100-400mm(wire diameter 5-6mm) |
| Number of welding spots |
31 |
| Welding speed |
50-75 times/min |
| Driving motor power |
5.5kW |
| Rated capacity |
100kVA x 4 |
| Dimension of the machine |
4900 x 2400 x 1600mm |
| Weight of the machine |
3000kg |
Audited Supplier 
I Characteristics:
){kind=link}