Vacuum Pressure Impregnation Equipment and DIP Tank Systems

• After-sales Service: Yes
• Warranty: One Year
• Effective Dimension: 2000 X 2300mm (H)
• Volume: 6.7m3
• Load Capacity: 10t, Vertical
• Tank Body Material: Q235
• Design Pressure: Less Than 0.1MPa
• Transport Package: Wooden Package
• Trademark: ZHENHUAN
• Origin: China

Product Description

VACUUM IMPREGNATION DRYER 
Vacuum Pressure Impregnation Equipment and dip tank systems

I Brief description and characteristics
Description
This kind of equipment is mainly used for motor stator vacuum dipping paint.
II Supplying range of the whole system:
2.1 Vacuum pressure impregnating tank system, one
2.2 Paint storage tank system, one
2.3 Vacuum system, one
2.4 Filter system, one
2.5 Washing system, one
2.6 Cooling system, one
2.7 Heating system, one
2.8 Air purification system, one
2.7 Paint return system one
2.8 Electric control system, one
2.9 Ventilating system, one
III Main illustrations and parameters
3.1 Vacuum-pressure impregnating tank system (2000 x 2300mm) (effective impregnating height is 2000mm)
3.1.1 Main parameters

Effective dimension	Φ2000 x 2300mm (H)
Volume	6.7m3
Load capacity	10T, vertical
Design pressure	<0.1MPa
Working pressure	<0.1MPa
Design vacuity	-0.095MPa
Working vacuity	-0.080~-0.095MPa
Inspection window.	Φ160 x 160mm, 2pcs
Tank body material	Q235

3.2 Paint storage tank system
3.2.1 Main parameters:

Effective dimension	Φ1900 x 2300mm
Volume	6.2m³
Ultimate pressure	<0.1MPa
Working pressure	<0.1MPa
Ultimate vacuity	-0.095MPa
Working vacuity:	-0.080--- -0.095MPa
Tank body material	Q235
Working temperature	Room temperature 40ºC
Load capacity	10T

3.3 Vacuum system

Design vacuum	-0.1MPa
Working vacuum	-0.095MPa
Rotary plate valve pump	2X-100, 7.5kW
Roots pump	ZJ-300, 4kW
Vacuum buffer tank	1pcs

3.4 Washing system:
3.4.1 Washing tank: 1pcs
3.4.2 Liquid level indication: 1 sets

3.5 Heating system
3.5.1 Main parameter

1. Heater: 2 pieces, total heating power:54kW
2. Air blower: 2 pieces. Shanghai
3. Heat exchanger:1 set
4. Heating air flue: 2pcs

Air blower- heater- heating air flue- heat exchanger-air blower, which reducing heating time and saving energy, total heating of whole equipment is 84kW, heating pipe adopts high temperature resistant aluminum silicate
3.6 Cooling system

1. Condenser, 1 set
2. Catcher, 1 set
3. Cooling water tank, 1 set

3.7 Discharge system

1. Discharge buffer tank, 1 set
2. Discharge vent pipe, 1 set

3.8 Electric control system

1. Integrated electrical control cabinet,
2. Chinese( low-voltage electrical)
3. Electrical contact vacuum gauge, level gauge and so on.
4. Cable, cable bridge and so on.
5. Interlocking of each pump valve.
6. Sensor, 5 sets
7. Intelligent dual-display temperature control instrument, 5 sets