| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| No. | Term | Data |
| 1 | Power supply | 415V×50HZ×3 phase |
| 2 | Product wire size | 0.70mm-2.50mm |
| 3 | Number of wire lines | 6line |
| 4 | Passes of coating enamel | single coated 7passes |
| 5 | Line spacing | 11.5mm |
| 6 | line height | 1000 mm |
| 7 | Leading wire method | Wires are arranged lengthways, control 1strips of steel strip independently. |
| 8 | Weight of take up wires | PT25-PT60 |
| 9 | The electric power required | About 220KW |
| 10 | Painting Color | annealer furnace and oven are painted silver pain to resists heat 350ºC. |
| No. | Term | Data |
| 1 | Independent dismounting frame | rolling diswinding |
| 2 | Spacing between outings | 800 mm |
| 3 | Guide wheel | 150 alloy aluminum guide wheel diameter |
| 4 | Firing device | iron shaft discharger with diameter500Pay off cover:30fliers for unwinding wire, suitable forΦ500 iron spool. |
| 5 | The height of the paying off shelf | 1500mm |
| 6 | the height of running wires | 1600mm, side-standing type |
| No | Term | Data |
| 1 | Size: Length | 11000mm |
| 2 | 26annealer pipes size | 25x2.0 |
| 3 | material | SUS321 |
| 4 | Annealer temperature | Heat by MAX550ºC tubular electric heating element . |
| 5 | Control mode | inlet, middle and outlet temperature control, thermocouple temperature measurement, heating part is controlled by the solid-state relay. |
| 6 | Exit part | Cooling with sink. The anneal entrance equipped with good quality bearing. |
| 7 | Blow the cooling water off the surface by hyperbaric ductwork after out of water. | |
| No. | Iterm | Information |
| 1 | Enamel trough |
|
| (B)The materials used in the trough and pipe are stainless steel, feed circularly | ||
| (C)Governor control motor speed | ||
| (D)There is a 40W double daylight lamp above the enamel tank for lighting. | ||
| (E)Install the dust cover device. | ||
| 2 | Enamel feeding system: | (A)The enamel circulate constantly through the feeing box to make enamel is plastered evenly. The whole tank body is stainless steel material. |
| (B)Control the temperature with a electric heating thermostat | ||
| (C)Equipped with float adjusting valve and Liquid Surface and Alarm System. | ||
| (D)Equipped with Enamel Lacking Alarm System and overflow alarm system. |
| No. | Term | Data |
| 1 | Oven style | The heat energy can be used repeatedly |
| 2 | The oven size: length | 7100mm |
| 3 | Temperature | The temperature of oven surface is below zero 60ºC. (In room below35ºC) |
| 4 | Strip line | stainless steel strip |
| 5 | heating mode | Heating pipe reaching 550 degree. The electricity capacitance can make the oven temperature up to 550ºC within 2hours. |
| No. | Information | |
| 1 | Heating part | inlet temperature, intermediate temperature, outlet temperature, pre-catalytic temperature. |
| 2 | Inlet temperature and outlet temperature | "S, C, R" PID control, other relay PID control. |
| 3 | The distance from the sides of oven to the edges | 40 mm |
| 4 | Cooling | Outlet installation air curtain cooling system. |
){kind=link}