Arch Span Roof Roll Forming Machine for 36m Large Span Curving Steel Roof Tile

• Customization: Available
• After-sales Service: Available
• Warranty: 1 Year
• Model NO.: MIC-240
• Condition: New
• Customized: Non-Customized
• Usage: Roof
• Transmission Method: Electric
• Curve Roof Span: 8~36m
• Roof Material: High Yield Strength Cold Roll Steel
• Steel Sheet Width: 914mm
• Steel Sheet Thickness: 0.6~1.5mm
• Effective Roof Tile Width: 610mm
• Production Speed: 10~12m/Min
• Transport Package: Bare in Container
• Specification: full in one 40′ container
• Trademark: Zhenhuan
• Origin: China
• Production Capacity: 10 Machines Per Quarter

Product Description

I Description of arch span curve roof roll forming machine
This super span MIC-240 machine is developed by ourselves with technology similar to ABM MIC-240 forming machine. It is comprised of mechanical expansion decoiler, straight panel forming unit, hydraulic mould cutting device, curving panel forming unit, control system, hydraulic system, run-out racks for straight and curve panels and all other accessories. All parts are installed on a mobile chassiss. So it is suitable for site working.
II Main features of arch span curve roof roll forming machine
2.1 Rollers are made of good steel, coated with rigid chrone.
2.2 There is an auto-feed device which can feed 0.6-1.5mm color steel sheets. During production, there is no need to adjust the clearance between top and bottom rollers.
2.3 Light and convenient hoist, only 2kg (those from USA is 30kg). And thus makes quick and convenient installation.
2.4 Large span, high corrugation, high tension strength, nutless, etc.
2.5 Improved control box and electric box, anti dust and weather proof.
2.6 Electric motors driving roll forming, curving and cutting, no hdyraulic system, no possible oil leakage and maintenance
2.7 Profile:
III Main technical data if arch span curve roof roll forming machine:

Item	Data
Machine dimension (L x W x H)	8900mm x 2250mm x 2500mm (can be loaded in one 40' GP container)
Machine weight	About 10T
Control system	Normal electric control, length detected by limit switch
Roll forming stations	13 steps
Material of rollers	45# forging steel, rigid chrome coated
Material of roller shafts	45# steel, hardened & tempered, diameter 65mm
Material of cutting blade	Cr12, quenched HRC 58~62
Main driving motor power for roll forming	7.5kW
Curving motor power	3+1.1+1.1kW
Cutter driving motor power	3kW
Suitable material	galvanized steel or pre-painted steel,yield strength not less than 280MPa, 914mm wide, 0.6-1.5mm thick
Roll forming speed	10~12m/min
Suitable arch roof span	8~36m

IV Buildup of arch span curve roof roll forming machine
-- One mechanical expansion decoiler for coils
-- Straight panel forming unit
-- Curving panel forming unit
-- Electric control system
-- Electric mould cutter
-- One manual clamp (for clamping the beginning seam lock between two curved panels)
-- Small C chanel bending machine
-- Lifting clamps, 8 sets
-- Lifting steeve, three pieces
-- Lock seaming machine, one piece
-- Run-out racks for straight panel and curving panel: each 8 pcs
-- Hand clamp for clamping curved panels to let seamer seam two panels together: 1 piece
-- Operation manual