NHZ-1000C Vacuum Kneader with screw extruding discharging way
Vacuum kneader for hot melt adhesive sealant, silicone rubber, CMC, battery, ink, dye, pharmacy, resin, plastics.
Kneader is a kind of ideal high-performance equipment for mixing and kneading high viscosity and
super high viscosity materials.
Vacuum Kneader is widely used in such industries as high viscosity sealant, silicone rubber, CMC, battery, ink, dye, pharmacy, resin, plastics and cosmetics, etc.
Kneader temperature adjustment can be done by using heat transfer oil circulation, electric heating, steam and water cooling. It can be made tank body jacket, wallboard jacket, stirrer passing cooling water, passing heat transfer oil and such structures for heating and cooling.
| Total Capacity |
1200 L |
| working capacity |
800 L |
| heating way |
double jacked - 4 sides and bottom |
| Main motor |
75kW/6P/AC400V/50Hz |
| Manufacture of main motor |
Siemens Standard Motor Ltd(China) |
| Main reducer(gear unit) |
H2SH10-22.4-B/Boneng Transmission |
| Revolution of blades(front/rear) |
32/22 rpm |
| Blade shape |
Double sigma blades |
| Materiel of blade |
blades made by cast steel ,surface covered with SUS304 |
| Inner side of trough |
12mm SUS304 |
| Material of jacket |
12mm mild steel |
| Distance between the blade and trough |
Less than 3 mm |
| Distance between blade and trough end |
Less than 3 mm |
| Mode of opening lid |
Open lid by hydraulic cylinder |
| Hole on the lid |
sight-glass,vacuum nozzle,ball valve,etc. |
| Material of seal for lid |
viton |
| Packing of shaft |
PTFE |
| discharge materiel |
Screw extruding |
| Extruding motor |
15kW/4P/AC400V/50Hz |
| inverter for extruding motor |
15kW/4P/AC400V/50Hz/EURA |
| Extruding reducer |
KW97-25-YP-15/Boneng Transmission |
| Material of screw |
41CrAlMo7(DIN) |
| Screw surface treatment |
nitrogenization |
| Screw diameter |
Φ190mm |
| Screw surface hardness |
More than HRC64 |
| Revolution of screw |
0~58rpm |
| Max. Capacity of Extruder |
120L/min |
| Model of hydraulic unit |
YZLE40C |
| Power of hydraulic unit |
1.5 kW/4P/AC400V/50Hz |
| Limit vacuum |
-0.095MPa |
| Water loop vacuum pump |
SK-3A/5.5kW/AC400V/50Hz |
| Speed bleeding air |
3m3/min |
| weight |
11T |
| Dimension(L×W×H) |
Approx.3800×2200×2250 |
Audited Supplier 
){kind=link}
){kind=link}