Tube Cold Drawing Machine with Automatic Point Pushing

• Customization: Available
• After-sales Service: Supply After-Sale Service
• Warranty: 1 Year
• Model NO.: ZHAPPLB-20T
• Drawing Force: 200kn
• Drawing Speed: 0-15m/Min
• Effective Length: 6m
• Power: 75kw
• Transport Package: Bare Loaded in Container
• Specification: customized
• Trademark: Zhenhuan
• Origin: China
• Production Capacity: 15 Sets Per Month

Product Description

ZHAPPLB-20T Tube Cold Drawing Machine With Automatic Point Pushing
I. Description
This automatic point pushing cold drawing machine can be used to draw the brass bar and other material. It is the double chain type. The brass bar can be loaded and unloaded auotmatically.
If you need the Manual Point Pushing Cold Drawing Bench, then it will not contain the auotmatic loading station)
II. Main technical data

Serial No.	Item	Data
1	Drawing form	One line
2	Raw material diameter	Stretching: ordinary copper, aluminum ф80mm, carbon steel ф70mm, profile cross-sectional area ≤5000mm². Special hard materials vary depending on the material characteristics
3	Effective length	6m
4	Drawing force	20Ton
5	Drawing speed	0-15m/min
6	Motor power	75kW
7	Reducer	ZQ850
8	Speed controller method	VFD
9	Center height	About 920mm
10	Hydraulic propulsion capability	The surface reduction rate of ordinary copper and aluminummaterialsis about 8-12%, the surface reduction rate of carbon steel is 6-10%, and the surface reduction rate of hard materials is 3-5%.
11	Hydraulic propulsion stroke	200mm
12	Hydraulic propulsion system	Drawing oil cylinder Ф150*200 mm (Double oil cylinder pushing); Rated pressure 21Mpa
13	Oil pump motor	11kW
14	Hydraulic propulsion capacity	30T
15	Power supply voltage	440V 60HZ
16	Frame	The front section of the frame C500+C200; rail 50*50; The rear section of the fully automatic feeding rack, hydraulic push. Both the mold base section and the power transmissionsection have special reinforced bases.
17	Chain	4-inch double chain (TaiwanBrand)
18	Mold base mounting frame	Steel plate welded structure
19	Drawing oil injection method	Pneumatic diaphragm pump, automatic pump oil for outer mold
20	Carriage	Pneumatic clamping, pneumatic chain hook, return chain drive with deceleration
21	Loading station	Automatic feeding rack
22	Unloading station	The cylinder rocker arm rotatesto catch the material.
23	Pulling trolley	Pneumatic gripper, Clamp type, pneumatic chain
24	Linear track	Not including
25	Mould	Not including