Heat Exchanger Fin Punching Press
I Description of fin punching press
JF series air conditioner fin punching lines are specially designed for producing aluminum & copper fins for air conditioners and heat exchangers.
Line buildup:
- Aluminum foil decoiler, single-head, active decoiling, phototube controlling
- Oil-through device, with oil leveller
- JF high speed punching press + high precision die + PLC control pulling device
- Die auto lubricating device and oil spraying waste device
- Pneumatic fin absorbing device
- Movable double-station fin collecting device
- PLC control system, displaying punching angle, stroke, hole number, stacking quantity, etc.
II Main features of fin punching press
- PLC centralized control
- Pneumatic absorbing force can be adjusted
- Bracket of absorbing device is adjustable for different requirements of dies
- Double-station collecting device, one station collecting, one station unloading
- Collecting rod is made by high strength spring steel, long time
- Punching press adopts dry-type pneumatic friction clutch, big torque, small inertia
- Punching press adopts six-side guides, long guiding distance, high anti-offload capability, elongating die life.
- Slide is fitted with hydraulic over-load protection device, protecting safe of press and die
- Compulsive centralized lubricating system from Japan
- Main spindle adopts NSK bearing
- Equipped with various safety & security interlocking system, self-diagnosing and alarming
III Main technical data of fin punching pres
No. |
Item |
Data |
1 |
Nominal force |
450kN |
2 |
Slide stroke |
40mm |
3 |
Stroke times |
120~200 per minute |
4 |
Max. Die height |
210~270mm |
5 |
Throat depth |
330mm |
6 |
Slide bottom dimension |
300 x400mm |
7 |
Working table dimension |
660 x 850mm |
8 |
Motor power |
5.5kW |
9 |
Fin collecting height |
Max. 650mm |
10 |
Absorbing length |
Max. 1200mm |
11 |
Aluminum foil |
OD 850, ID 75mm, max. width 330mm |
12 |
Compressed air |
0.6MPa, 0.4m3/h |
13 |
Whole line occupation |
8 x 2m |
14 |
Whole line weight |
8000kg |
IV Main configuration of fin punching press
No. |
Item |
Description |
1 |
PLC |
OMRON from Japan |
2 |
HMI |
EASYVIEW from Taiwan |
3 |
Inverter |
INOVANCE from Shenzhen |
4 |
Main motor |
TECO from Taiwan |
5 |
AC contactor |
Schneider from Shanghai |
6 |
Buttons, knobs, indicating lights |
Schneider from Shanghai |
7 |
Dual-link magnetic valve |
TACO from Japan |
8 |
Pneumatic valve |
AIRTAC from Taiwan |
9 |
Lubricating pump |
IHI from Japan |
10 |
Overload protection pump |
KINGAIR from Taiwan |
11 |
Oil feeder for balancer |
ISHAN from Taiwan |
We can provide complete solutions for heat exchanger manufacturing, not only this fin punching press, but also hairpin tube bender, return tube bender, copper tube bender, tube expander, brazing machine, etc.